Allyl Chloride CAS 107-05-1

1. Allyl chloride is primarily used as an intermediate in the synthesis of epichlorohydrin, glycerin, and allyl derivatives for polymers, resins, and pharmaceuticals.
2. Allyl chloride CAS 107-05-1 serves as a key building block for allylation reactions in organic synthesis.
3. This compound is also utilized in the production of pesticides, flavorings, and specialty chemicals.

1. Store allyl chloride in a cool, dry, well-ventilated place, away from heat, sparks, and open flames. Store under an inert atmosphere if possible.
2. Keep the container tightly closed and separated from strong oxidizing agents, strong bases, acids, and metals.
3. Handle Allyl chloride CAS 107-05-1 with extreme caution using appropriate personal protective equipment (PPE): chemical-resistant gloves, safety goggles, face shield, and flame-resistant clothing. Always use a fume hood.

1. Immediately evacuate and isolate the area. Eliminate all ignition sources. Wear full protective gear (gloves, goggles, protective clothing, respirator).
2. Contain Allyl chloride CAS 107-05-1 with sand or other inert, non-combustible material. **Do not use water.** Transfer to a sealed, labeled hazardous waste container.
3. Prevent the compound from entering drains, sewers, or the environment. Ventilate area thoroughly. **Call emergency services for large spills.**

1. Allyl chloride is **highly flammable** and its vapors can form explosive mixtures with air. It is toxic, a potent lachrymator, and causes severe skin burns, eye damage, respiratory irritation, and organ damage. It is a suspected carcinogen.
2. Allyl chloride CAS 107-05-1 may polymerize violently under heat, pressure, or upon contact with catalysts/initiators. Reacts with water to release hydrochloric acid.
3. **Always consult the official allyl chloride Safety Data Sheet (SDS) and treat it as a severe fire, health, and reactivity hazard.** Specialized training is required.