Anilino-methyl-triethoxysilane CAS 3473-76-5

1. Anilino-methyl-triethoxysilane is a novel α-silane coupling agent used in the production of silyl-modified polymers (SMPs) that serve as binders in adhesives and sealants .
2. Anilino-methyl-triethoxysilane CAS 3473-76-5 can be used as a crosslinker, water scavenger, and adhesion promoter in silane-crosslinking formulations such as adhesives, sealants, and coatings .
3. Anilino-methyl-triethoxysilane is employed as a surface modifier for fillers like glass, metal oxides, aluminum hydroxide, and pigments, and acts as a tackifier for RTV silicone rubber, glass fiber reinforced plastics, and phenolic resins .
4. In analytical chemistry, Anilino-methyl-triethoxysilane is used to prepare Fe₃O₄NPs@SiO₂-AMTS magnetic nanocomposites for the HPLC-MS detection of phthalate esters in environmental samples .

1. Anilino-methyl-triethoxysilane must be stored in a tightly sealed container in a cool, dry, and well-ventilated environment, protected from light and moisture .
2. Anilino-methyl-triethoxysilane CAS 3473-76-5 is moisture-sensitive and air-sensitive; it should be stored under inert gas (argon or nitrogen) and recommended storage is in a cool and dark place below 15°C .
3. Anilino-methyl-triethoxysilane is classified with GHS signal word "Warning" and hazard statements H315 (Causes skin irritation), H319 (Causes serious eye irritation), and H335 (May cause respiratory irritation) .
4. Personnel must wear chemical-resistant gloves, safety goggles with side-shields, and protective clothing when handling this substance, ensuring adequate ventilation in work areas .

1. Isolate the spill area, ensure adequate ventilation, and wear full personal protective equipment including chemical-resistant gloves, safety goggles, and suitable dust respirator when Anilino-methyl-triethoxysilane is released .
2. For Anilino-methyl-triethoxysilane CAS 3473-76-5 liquid spills, contain and collect the product using inert absorbent materials such as sand, diatomite, or universal binders with non-sparking tools, and place into suitable closed containers for disposal .
3. Avoid creating vapors or mists during cleanup to prevent respiratory exposure; prevent the product from entering drains or water courses .
4. Dispose of collected material according to local, state, and federal environmental regulations through licensed chemical destruction or controlled incineration .

1. Anilino-methyl-triethoxysilane is a combustible liquid with a flash point >110°C (closed cup) .
2. Use water spray, dry chemical powder, carbon dioxide, or alcohol-resistant foam to extinguish fires involving the product; do NOT use a direct water jet as Anilino-methyl-triethoxysilane CAS 3473-76-5 may scatter burning material .
3. Firefighters should wear self-contained breathing apparatus in pressure-demand, MSHA/NIOSH approved, and full protective gear when handling burning Anilino-methyl-triethoxysilane due to hazardous decomposition gases generated by thermal decomposition .
4. During combustion, may emit irritant and toxic fumes; contain fire runoff to prevent environmental contamination .