Sodium Of Polyaspartic Acid CAS 181828-06-8

1. Sodium of Polyaspartic Acid CAS 181828-06-8 is a biodegradable scale inhibitor and dispersing agent widely used in water treatment to prevent encrustation and disperse particles in industrial and cooling water systems .
2. Sodium of Polyaspartic Acid is employed as a "green" co-builder and anti-redeposition agent in detergents and cleaning formulations .
3. Sodium of Polyaspartic Acid acts as a fertilizer synergist and soil conditioner in agriculture to enhance nutrient (especially phosphorus) uptake, and in industrial applications as a dispersant for pigments and fillers .

1. Store Sodium of Polyaspartic Acid CAS 181828-06-8 in a tightly sealed container in a cool, dry, and well-ventilated area ; storage stability is typically ten months .
2. For the solid form (powder/granules), store below -15°C to -20°C, protected from light and under an inert atmosphere (argon flushing) to prevent degradation .
3. The product is alkaline (pH 9.0-11.0 in a 1% solution) ; avoid contact with skin and eyes, and wash thoroughly with water in case of contact .

1. Isolate the spill area and wear suitable personal protective equipment (gloves, goggles) .
2. For liquid spills, contain with inert absorbent material; for solid spills, sweep up carefully and place into sealed, labeled containers for disposal .
3. No significant environmental hazards are expected from an accidental release, as it is biodegradable and non-hazardous .

1. Sodium of Polyaspartic Acid CAS 181828-06-8 is considered an environmentally friendly, non-toxic, and fully biodegradable polymer (degrading to water and CO₂) .
2. Sodium of polyaspartic acid is classified as non-hazardous with low concern for aquatic toxicity and is readily biodegradable .
3. The product is alkaline and may cause mild skin or eye irritation upon contact; wash affected areas with plenty of water .