3-Chloro-2-fluorobenzaldehyde CAS 85070-48-0

1. 3-Chloro-2-fluorobenzaldehyde is primarily used as a key intermediate in the synthesis of pharmaceuticals and agrochemicals.
2. 3-Chloro-2-fluorobenzaldehyde CAS 85070-48-0 serves as a versatile building block for constructing complex halogenated aromatic and heterocyclic compounds.
3. This compound is also utilized in materials science research and the development of specialty chemicals or dyes.

1. Store 3-chloro-2-fluorobenzaldehyde in a cool, dry, well-ventilated place, protected from light and away from heat and ignition sources.
2. Keep 3-Chloro-2-fluorobenzaldehyde CAS 85070-48-0 the container tightly closed and separated from strong oxidizing agents, strong bases, and reducing agents.
3. Handle with appropriate personal protective equipment (PPE), including chemical-resistant gloves, safety goggles, and a lab coat. Use a fume hood to avoid inhalation of vapors.

1. Immediately isolate the area, ensure ventilation, and wear suitable protective equipment (gloves, goggles, protective clothing, respirator if vapors are significant).
2. Absorb 3-Chloro-2-fluorobenzaldehyde CAS 85070-48-0 the liquid spill with an inert, non-combustible material (e.g., sand, vermiculite). Place the contaminated material in a sealed, labeled hazardous waste container.
3. Prevent the compound from entering drains, sewers, or the environment. Decontaminate surfaces with an appropriate solvent or detergent, following local regulations.

1. 3-Chloro-2-fluorobenzaldehyde is harmful if swallowed, inhaled, or in contact with skin. It causes severe skin burns and eye damage and may cause respiratory irritation.
2. 3-Chloro-2-fluorobenzaldehyde CAS 85070-48-0 is flammable and its vapors can form explosive mixtures with air.
3. Always consult the official 3-chloro-2-fluorobenzaldehyde Safety Data Sheet (SDS) for the most current and comprehensive hazard, handling, and regulatory information.