2-Fluorophenol CAS 367-12-4

1. 2-Fluorophenol CAS 367-12-4 serves as an important intermediate in pharmaceutical synthesis, including the preparation of enzyme inhibitors for tuberculosis and Parkinson's research .
2. 2-Fluorophenol is a versatile building block for creating functionalized phenolic compounds, specialty polymers, and liquid crystals for electronics and coatings industries .
3. 2-Fluorophenol is utilized in environmental bioremediation studies and as a probe for investigating protein-ligand interactions and radiopharmaceutical labeling .

1. Store 2-Fluorophenol CAS 367-12-4 in a tightly sealed container under inert gas in a cool, well-ventilated place, protected from light, with recommended temperatures between 2-8°C or below 15°C .
2. Keep 2-Fluorophenol strictly away from strong oxidizing agents, strong bases, acid chlorides, and acid anhydrides to prevent hazardous decomposition and violent reactions .
3. Handle 2-Fluorophenol using appropriate personal protective equipment including chemical-resistant gloves (fluorinated rubber or neoprene), face shield, and in a fume hood to avoid breathing vapors .

1. Isolate the spill area (at least 50 meters/150 feet), eliminate all ignition sources, and contain liquid 2-Fluorophenol CAS 367-12-4 using dry inert absorbent material like sand, preventing entry into drains or waterways .
2. For small spills, dampen 2-Fluorophenol with alcohol, transfer to a suitable container, and solvent wash contaminated surfaces with alcohol followed by soap and water .
3. Personnel cleaning 2-Fluorophenol spills must wear full protective equipment including self-contained breathing apparatus, as vapors may form explosive concentrations and the compound is classified for transport.

1. 2-Fluorophenol CAS 367-12-4 is a flammable liquid and vapor (H226, flash point 46°C) causing skin irritation (H315), serious eye irritation/damage (H319, H318), and may cause respiratory irritation (H335) with GHS signal word "Danger" .
2. 2-Fluorophenol is harmful if swallowed (oral LD50 >500 mg/kg), harmful in contact with skin (H312), and may be toxic by inhalation; some classifications indicate suspected carcinogenicity (H351) .
3. Combustion of 2-Fluorophenol produces toxic fumes including carbon monoxide, carbon dioxide, and hydrogen fluoride; the compound has NFPA health rating of 2, is stable under recommended conditions, and is for research use only .