4-(Ethylaminomethyl)pyridine CAS 33403-97-3

1. 4-(Ethylaminomethyl)pyridine CAS 33403-97-3 is a secondary amine primarily used as a reagent in organic synthesis, for example in the synthesis of sodium dithiocarbamate ligands and their diorganotin derivatives .
2. 4-(Ethylaminomethyl)pyridine serves as a valuable building block in pharmaceutical and chemical research for preparing pyridine-based compounds and biologically active molecules .
3. 4-(Ethylaminomethyl)pyridine is suitable for use in the synthesis of complex organic molecules, such as those involving potassium-crown ether complexes .
4. Researchers utilize 4-(Ethylaminomethyl)pyridine for R&D purposes only, leveraging its amine and pyridine functional groups for diverse coupling and functionalization reactions .

1. 4-(Ethylaminomethyl)pyridine CAS 33403-97-3 must be stored in a tightly sealed container in a cool, dry, and well-ventilated environment, preferably under inert gas (e.g., nitrogen or argon) as it is air sensitive .
2. 4-(Ethylaminomethyl)pyridine is a combustible liquid with a flash point of 98°C (208.4°F) and should be kept away from heat, sparks, open flames, and incompatible materials such as strong oxidizing agents .
3. Personnel must wear chemical-resistant gloves, safety goggles with side-shields, and protective clothing when handling this substance, as it causes skin and serious eye irritation and may cause respiratory irritation.
4. Avoid breathing vapors, mist, or dust, ensure adequate ventilation in work areas (preferably a chemical fume hood), wash thoroughly after handling, and store locked up .

1. Isolate the spill area, ensure adequate ventilation, remove all sources of ignition, and wear full personal protective equipment including chemical-resistant gloves and safety goggles when 4-(Ethylaminomethyl)pyridine CAS 33403-97-3 is released .
2. Soak up 4-(Ethylaminomethyl)pyridine with inert absorbent materials such as diatomite, sand, or universal binders using non-sparking tools, and place into suitable closed containers for disposal as hazardous waste .
3. Avoid creating vapors or mists during cleanup to prevent respiratory exposure, decontaminate surfaces using appropriate methods, and prevent the product from entering drains or water courses .
4. Dispose of collected material according to local, state, and federal environmental regulations through licensed chemical destruction or controlled incineration .

1. 4-(Ethylaminomethyl)pyridine is a combustible liquid with a flash point of 98°C (208.4°F) - closed cup, requiring considerable preheating before ignition, and may decompose under fire conditions .
2. Use dry chemical powder, carbon dioxide, alcohol-resistant foam, or water spray to extinguish fires involving the product; do NOT use water jet as it may spread the fire .
3. Firefighters 4-(Ethylaminomethyl)pyridine should wear self-contained breathing apparatus and full protective gear when handling burning 4-(Ethylaminomethyl)pyridine due to hazardous decomposition gases including carbon oxides and nitrogen oxides (NOx) .
4. During combustion, may emit irritant and toxic fumes; move containers from the fire area if safe to do so, cool exposed containers with water spray, and contain fire runoff to prevent environmental contamination .