Bisphenol A-Glycidyl Methacrylate CAS 1565-94-2

1. Bisphenol A-Glycidyl Methacrylate is primarily used as the fundamental resin monomer in dental composite materials, where its rigid aromatic structure and ability to form hydrogen bonds provide high mechanical strength and low polymerization shrinkage .
2. Bisphenol A-Glycidyl Methacrylate CAS 1565-94-2 serves as a base material for dental sealants, adhesives, and restorative composites, typically combined with low-viscosity comonomers such as triethylene glycol dimethacrylate (TEGDMA) to achieve workable consistency and optimal handling properties .
3. Bisphenol A-Glycidyl Methacrylate is employed in orthopedic surgery as a component of bioactive bone cements for implant fixation, particularly investigated for acetabular component fixation in total hip arthroplasty procedures .
4. Researchers utilize Bisphenol A-Glycidyl Methacrylate CAS 1565-94-2 in surgical applications beyond dentistry, including as a reconstructive material for repairing cerebrospinal fluid leaks following craniotomy procedures, where it provides rigid structural support and watertight closure of skull base defects .

1. Bisphenol A-Glycidyl Methacrylate must be stored in a tightly sealed container in a cool, dry, and well-ventilated environment protected from light and heat, as the product is unstable and sensitive to light and may undergo spontaneous polymerization .
2. Bisphenol A-Glycidyl Methacrylate CAS 1565-94-2 is classified with GHS hazard statements H315 (Causes skin irritation), H317 (May cause an allergic skin reaction), H318 (Causes serious eye damage), and H319 (Causes serious eye irritation), with signal word "Danger" .
3. Personnel must wear chemical-resistant gloves, safety goggles with side-shields, face protection, and protective clothing when handling Bisphenol A-Glycidyl Methacrylate, as Bisphenol A-Glycidyl Methacrylate CAS 1565-94-2 causes serious eye injury and may cause allergic dermatitis on topical exposure, particularly affecting the fingertips in dental workers .
4. Avoid inhalation of dust particles or vapors, ensure adequate ventilation in work areas, and follow precautionary statements P280 (wear protective gloves/eye protection), P302+P352 (IF ON SKIN: wash with plenty of water), and P305+P351+P338 (IF IN EYES: rinse cautiously with water) .

1. Isolate the spill area, ensure adequate ventilation, and wear full personal protective equipment including chemical-resistant gloves, safety goggles, and appropriate respiratory protection when Bisphenol A-Glycidyl Methacrylate is released .
2. Collect Bisphenol A-Glycidyl Methacrylate CAS 1565-94-2 by sweeping or using inert absorbent materials, taking care to avoid dust formation, and place into suitable closed containers for disposal, as the liquid may polymerize if exposed to heat or light .
3. Avoid creating vapors or dust clouds during cleanup to prevent respiratory exposure, decontaminate surfaces using appropriate methods, and prevent the product from entering drains or water courses due to potential environmental hazards .
4. Dispose of collected material according to local, state, and federal environmental regulations, as the substance requires handling as hazardous waste due to its toxicity and potential endocrine-disrupting properties .

1. Bisphenol A-Glycidyl Methacrylate is not classified as highly flammable but may decompose under fire conditions, emitting toxic fumes including carbon monoxide, carbon dioxide, and irritating gases generated by thermal decomposition .
2. Use dry chemical powder, carbon dioxide, alcohol-resistant foam, or water spray to extinguish fires involving the product, selecting appropriate extinguishing media based on surrounding environment .
3. Firefighters Bisphenol A-Glycidyl Methacrylate CAS 1565-94-2 should wear self-contained breathing apparatus and full protective gear when handling burning Bisphenol A-Glycidyl Methacrylate due to hazardous decomposition gases and to prevent contact with skin and eyes .
4. During combustion, may emit irritant and toxic fumes; move containers from the fire area if safe to do so, cool exposed containers with water spray, and contain fire runoff to prevent environmental contamination .