2-Fluorotoluene CAS 95-52-3

1. 2-Fluorotoluene is a key intermediate in the synthesis of pharmaceuticals (e.g., fluorinated drugs), agrochemicals (advanced pesticides and herbicides), and specialty chemicals . It serves as a building block for complex molecules, including indole derivatives via domino reactions .
2. 2-Fluorotoluene CAS 95-52-3 is utilized as a solvent in organic synthesis and as a modifier in material science to enhance the durability and environmental resistance of polymers and resins .
3. Applications of 2-Fluorotoluene also include its use in proteomics research to study protein interactions , in electronic state spectroscopy for understanding photochemical behavior , and in environmental monitoring for detecting pollutants .

1. Store 2-Fluorotoluene in a tightly sealed container in a cool, dry, well-ventilated area, away from heat, sparks, and open flames . Keep the container tightly closed and store at room temperature (RT) or in a cool, dry place .
2. Keep 2-Fluorotoluene away from strong oxidizing agents, strong reducing agents, and many amines, as it is incompatible with these materials . Protect from ignition sources and use explosion-proof equipment .
3. Always use 2-Fluorotoluene CAS 95-52-3 appropriate personal protective equipment (PPE) including chemical-resistant gloves (butyl rubber recommended), safety goggles, and protective clothing. Use only with adequate ventilation (fume hood) and avoid breathing vapors, mist, or dust .

1. Immediately isolate the spill area (at least 50 meters/150 feet in all directions), eliminate all ignition sources, and use personal protection including self-contained breathing apparatus . Contain 2-Fluorotoluene using dry sand, earth, or other inert, non-combustible absorbent material and do NOT let it enter drains or waterways .
2. Carefully collect 2-Fluorotoluene CAS 95-52-3 using clean, non-sparking tools and place it into sealed, labeled chemical waste containers for proper disposal according to local, state, and federal environmental regulations . For large spills, dike far ahead for later disposal .
3. Personnel must wear full chemical-protective equipment including SCBA during cleanup . 2-Fluorotoluene is classified for transport (UN2388, Hazard Class 3, PG II) and is a hazardous material requiring proper disposal .

1. 2-Fluorotoluene is classified as a highly flammable liquid and vapor (H225, GHS02) with a flash point of 12-13°C (53-55°F) and a lower explosive limit (LEL) of 1.3% . It may cause respiratory irritation (H335) and prolonged or repeated vapor exposure may produce systemic toxic effects .
2. 2-Fluorotoluene has a boiling point of 113-114°C and a melting point ranging from -87°C to -62°C . It is insoluble in water and may float or sink . Thermal decomposition or combustion produces toxic and irritating fumes including hydrogen fluoride .
3. Always consult 2-Fluorotoluene CAS 95-52-3 the specific Safety Data Sheet (SDS) for 2-Fluorotoluene for complete hazard information (GHS signal word "Danger"), first-aid procedures (P305+P351+P338 for eyes, P301+P330+P331 for ingestion, P303+P361+P353 for skin, P304+P340 for inhalation), and handling instructions . Precautionary statements include P210 (keep away from heat/sparks/open flames), P240 (ground/bond container), P280 (wear protective gloves/eye protection), and P403+P233 (store in well-ventilated place, keep container tightly closed) .