Dipropylamine CAS 142-84-7

1. Dipropylamine is primarily used as a key intermediate in the production of agricultural chemicals, including herbicides such as trifluralin, EPTC, and prosulfocarb .
2. Dipropylamine CAS 142-84-7 serves as a building block for manufacturing pharmaceuticals (e.g., anti-ulcer drugs), rubber accelerators, corrosion inhibitors, and surfactants .
3. Applications of Dipropylamine also include its use as an organic synthesis intermediate and solvent in various industrial processes .

1. Store Dipropylamine in a tightly sealed container in a cool, dry, well-ventilated area away from heat, sparks, and open flames; recommended storage temperature is below 37°C (98.6°F) .
2. Keep Dipropylamine strictly separate from strong oxidizing agents and acids due to incompatibility and the risk of violent reactions; containers and receiving equipment must be grounded/bonded to prevent electrostatic discharge .
3. Always use Dipropylamine CAS 142-84-7 appropriate personal protective equipment (PPE) including chemical-resistant gloves (rubber), tightly fitting safety goggles, and protective clothing; handle only with explosion-proof equipment in a fume hood .

1. Immediately isolate the spill area, eliminate all ignition sources, and evacuate non-essential personnel; contain Dipropylamine using dry, inert, non-combustible absorbent material (e.g., dry sand or universal binder) and prevent entry into drains or waterways .
2. Carefully collect Dipropylamine CAS 142-84-7 using non-sparking, explosion-proof tools into sealed, labeled chemical waste containers for proper disposal according to local, state, and federal environmental regulations .
3. Personnel must wear full chemical-protective equipment including self-contained breathing apparatus (SCBA) during cleanup; Dipropylamine is classified for transport (UN2383, Hazard Class 3/8, PG II) and requires hazardous waste disposal .

1. Dipropylamine is classified as a highly flammable liquid and vapor (H225, Danger) with a flash point ranging from 7°C to 17°C (45-63°F), and may form explosive mixtures with air (LEL 1.8-2.0%, UEL 9.3-10.4%) .
2. Dipropylamine is corrosive, causing severe skin burns and serious eye damage (H314/H318); Dipropylamine CAS 142-84-7 is harmful if swallowed (H302, oral LD50: 300-460 mg/kg rat), in contact with skin (H312), or if inhaled (H332, LC50: 4400 mg/m³ rat/4h) .
3. Always consult the specific Safety Data Sheet (SDS) for Dipropylamine for complete hazard information, first-aid procedures (P303+P361+P353 for skin, P305+P351+P338 for eyes, P301+P330+P331 for ingestion, P304+P340 for inhalation), and handling instructions.