Lauric Acid Diethanolamide CAS 120-40-1

1. Lauric acid diethanolamide (lauramide DEA) is a nonionic surfactant primarily used as a foam booster, viscosity enhancer, and emulsion stabilizer in personal care products such as shampoos, liquid soaps, bubble baths, and hair coloring formulations .
2. Lauric acid diethanolamide CAS 120-40-1 functions as a wetting agent and thickening agent in cosmetic products, providing enhanced texture and foam stability while helping to keep water-soluble and oil-soluble ingredients emulsified .
3. Lauric acid diethanolamide is utilized in detergent formulations and industrial cleaning applications where its surfactant properties improve cleansing efficacy and product consistency .
4. Researchers employ lauric acid diethanolamide as a model compound in toxicological studies investigating dermal exposure, carcinogenic potential, and the safety of diethanolamine derivatives in consumer products .

1. Lauric acid diethanolamide must be stored in a tightly sealed container in a cool, dry, and well-ventilated environment, protected from light and moisture, with recommended storage at room temperature (below 15°C in a cool, dark place) .
2. Lauric acid diethanolamide should be stored under inert gas as Lauric acid diethanolamide CAS 120-40-1 is air sensitive, and should be kept away from incompatible materials such as strong oxidizing agents to prevent decomposition .
3. Personnel must wear chemical-resistant gloves, safety goggles with side-shields, and protective clothing when handling lauric acid diethanolamide, as Lauric acid diethanolamide CAS 120-40-1 causes skin irritation (H315) and serious eye damage (H318) .
4. Lauric acid diethanolamide has a flash point of 86-160°C, is toxic to aquatic life with long-lasting effects (H411), and should be stored separately from foodstuff containers to prevent contamination .

1. Isolate the spill area immediately, ensure adequate ventilation, and wear full personal protective equipment including chemical-resistant gloves, safety goggles, and suitable respiratory protection when lauric acid diethanolamide is released .
2. For solid spills, collect Lauric acid diethanolamide CAS 120-40-1 by sweeping or vacuuming without creating dust using non-sparking tools; for liquid spills, contain and absorb with inert materials such as sand, diatomite, or universal binders .
3. Avoid creating dust or vapor clouds during cleanup to prevent respiratory exposure; collect spillage and prevent lauric acid diethanolamide from entering drains, sewers, or water courses .
4. Dispose of collected material as hazardous waste according to local, state, and federal environmental regulations through licensed chemical destruction or controlled incineration (P501) .

1. Lauric acid diethanolamide is not classified as highly flammable but may decompose under fire conditions, with a flash point of 86-160°C and a boiling point of 87-89°C at 12 mmHg .
2. Use Lauric acid diethanolamide CAS 120-40-1 water spray, dry chemical powder, carbon dioxide, or alcohol-resistant foam to extinguish fires involving lauric acid diethanolamide; do NOT use a direct water jet as it may scatter burning material .
3. Firefighters should wear self-contained breathing apparatus in pressure-demand, MSHA/NIOSH approved, and full protective gear when handling burning lauric acid diethanolamide due to hazardous decomposition gases generated by thermal decomposition .
4. During combustion, may emit irritant and toxic fumes; contain fire runoff to prevent environmental contamination and avoid release into waterways .